| Installation |
| Part l. Tools introduction |
| Design drawings,Marking gauge,Elastic string,Nails,Bi-color pencil,Hammer,Knife,Floor brush,Doctor blade,Tape measure. |
|
| Shovels-the shovels are used for filling in the quartz sands and rubber granules. |
|
| Manual cart-the manual cart is used for carrying the sands and rubber granules. |
| |
| Part ll. Preparations for installation |
| No.1.Recheck the dimension of the court and make sure it is accordant with the drawing.Check the base and make sure it's qualified. |
| |
| No.2.Clean the court surface and close it if possible to keep out irrelevant people during installation. |
| |
| No.3.Check and make sure of the quantity of grass rolls,check if the roll size and the roll numbers are conformed to the drawings. |
| |
| No.4.Make sure that the accessories (glue,joining tape,tools,etc.) are qualified for the installation. |
| |
| No.5.Make sure that the sand and rubber granules are qualified for the installation. Especially that the sands must be dry. wet sands are NOT allowed. |
| |
| Part lll. Installation process |
| Step 1. Make lines on the base |
| Tools: the drawing,marking gauge, bi-color pencil, tape measure, nails,hammer and elastic string. |
| |
| Step 2. Grass preparation |
| Tools: the drawings |
| |
| Step 3. Lay out the grass rolls and cut the edges |
| Tool: the knife |
| |
| Step 4. Join the edges |
| Tools: the knife and doctor blade |
| |
| Step 5. Cut out the game lines |
| Tool: the knife |
| |
| Step 6. Paste white lines into the carpet |
| Tool: the knife |
| |
| Step 7. Fill in quartz sands |
| Tools: the shovels and manual cart (if possible use a tractor or sand-filling machines for this step) |
| |
| Step 8. Fill in rubber granules |
| Tools: shovel and manual cart (if possible use a tractor or sand-filling machines for this step) |
| |
| The installation method is for your reference only! |
| |
| |
 |
